SHARKOON SATA QP Pro LAN (Giga) - Manual (Page 14)

www.sharkoon.de
sata qUICKpORt pRO lan
6.4 Factory default
A – Left-click the link to select the respective entry.
B – To recover the factory default settings enter the password into the “Password” area and confirm by left-clicking the
“Submit” button, “Clear” will discard your entry.
6.5 Firmware update
A – Left-click the link to select the respective entry.
B – To perform a firmware update, download the respective software from our website and save it locally. Then enter
the according password (see above) into the “Password”area and select the source path of the local update file
with “Search”.
C – “Submit” will confirm and start the update procedure. “Clear” cancels the action.
6.6 Password change
A – Left-click the link to select the respective entry.
B – To change the current password enter it into the “Current Password” area, then enter the newly assigned password
into the “New Password” area. Confirm the new pass word by re-typing it into the “Confirm New Password”
area. Left-clicking “Submit” will complete this procedure, “Clear” will abort.
A
A
B
B
A
B
c