SHARKOON SATA QP Pro LAN (Giga) - Manual (Page 13)

www.sharkoon.de
sata qUICKpORt pRO lan
6.2 Network
A – Left-click the link to select the respective entry.
B – This area displays the current network status: IP Setting (automatic or manual IP address assignment), IP Address
(IP address assigned to the server), Subnet Mask, MAC Address (the server’s MAC address).
C – This area allows configuring the network settings.
With “DHCP Setting” you define whether the network address shall be assigned automatically (Enable) or
manually (Disable). The respective manual settings you enter into the areas “IP Address” and “Subnet Mask”.
With “Server Name” you may define your own server name.
To protect the server settings from unwanted changes you need to assign a “Password”.
D – “Submit” saves your changes while “Clear” will discard them.
6.3 reset device
A – Left-click the link to select the respective entry.
B – Perform a reset after entering the assigned password into the “Password” area and confirm by clicking the “Submit”
button, “Clear” will discard your entry.
B
A
A
B
c
D