Seed Hawk TOOLBAR 2008 User Manual
Page 39
Note: All of the fertilizer knives will decrease in penetration
pressure.
Dial the shank pressure down. NOTE: (The needle on the
gauge will lower )
Step # 8 You now know that you need to increase your packing
and penetration pressures. Hold the shank pressure button to
change these pressures.
Every new Seed Hawk that is manufactured leaves with its shank
pressure set at approximately 900 PSI.
NOTE: (The chain that is between the seed and fertilizer knife is
tight).
Step # 7 In order to get the proper packing and penetrating forces per
field, we recommend that you lower your shank pressure from the cab
at the beginning of each field.
34