Seed Hawk TOOLBAR 2008 User Manual
Page 38
Step # 1 Turn the MAIN POWER switch on.
Step # 2 Take a look at your tractor hydraulic levers.
Step # 3 Lock on your tractor lever that your green banded hoses
are connected to. You will see full tractor pressure on the bottom
middle gauge of your hydraulic manifold.
Step # 4 While moving forward with your tractor, engage your
tractor lever that your red banded hoses are connected to.
Step # 5 Let the lever you last locked on come back into the neutral
position. This lever is never left in the on position. It is only needed
to raise and lower the shanks faster on headlands.
Step # 6 Turn on Meter Engage switch. This will start metering
products like seed and fertilizer. This switch also engages a valve
on the hydraulic manifold which maintains packing and penetration
pressure.
Locking this lever on for long periods of time will lead to o-ring
failure in your hydraulic block on your seeder. Please set your
detents or timers on this circuit.
33