Seed Hawk Ground Drive: Granular & Liquid 2011 - Manual (Page 49)

Seed Hawk
®
Manual Granular and Liquid Tanks Page 44
8.2 NORMAL STARTUP
For everyday operation the monitor will remember all settings that have been
saved from the previous use.
• Press the power button to begin.
• As the Seed Hawk Logo is displayed, the monitor performs a “self test”. During
this self test, the monitor will check that all “learned” sensors are connected.
• Once this test is complete, all sensors found by the system are listed as
shown in the image below.
• Press the soft key labeled “OK” to continue to the Normal Operate Screen.
Power
Button
Soft Keys