3 flare-type tube fittings 3.1.4 tire hub torque – Seed Hawk TOOLBAR 2014 User Manual
Page 12
![background image](/manuals/364501/12/background.png)
SEED HAWK
®
2014 TOOLBAR OPERATOR’S MANUAL
SEED HAWK
®
2014 TOOLBAR OPERATOR’S MANUAL
16
Tube Size OD
Inches
Nut Size
across flats
Inches
Torque
N•m (lb-ft)
Recommended # Turns
(after finger tightening)
turns (flats)
3/16”
7/16”
8 (6)
1/6 (1)
¼”
9/16”
12 (9)
1/6 (1)
5/16”
5/8”
16 (12)
1/6 (1)
3/8”
11/16”
24 (18)
1/6(1)
½”
7/8”
46 (34)
1/6 (1)
5/8”
1”
62 (46)
1/6 (1)
¾”
1-¼”
102 (75)
1/8 (0.75)
7/8”
1-3/8”
122 (90)
1/8 (0.75)
Description
Tire Size
Torque
N•m (lb-ft)
Wing Castor
(Front and Rear)
11 L 15 SL STUBBLE PROOF
203 (150)
Main Frame Castor
(Front)
11 L 15 HIGHWAY
203 (150)
Main Frame Castor
(Front)
19.0 / 45 x 17
203 (150)
Rear Axle Tire
500 / 45 x 22.5
271 (200)
Rear Axle Tire
30.5 L 32 SAT (Single)
475 (350)
Rear Axle Tire
30.5 L 32 SAT (Inner Dual)
475 (350)
Rear Axle Tire
30.5 L 32 SAT (Outer Dual)
475 (350)
3.1.3 Flare-Type Tube Fittings
3.1.4 Tire Hub Torque
17
3.2 Tire Pressure
3.3 Tractor Hydraulic Circuit Requirements
NOTE: Proper inflation of tire pressure contributes to longer tire life and
proper flotation for field operations. Tire inflation pressures listed are recom-
mended initial settings. Some soil conditions and operating environments may
dictate deviation (on Pneumatic Packer Tires Only) from the recommended
settings.
Use the following chart to check and adjust, if necessary, tire pressure.
IMPORTANT! MAX hydraulic system pressure should not exceed 3000 psi.
Contact dealer if tractor exceeds 3000 psi
Description
Tire Size
psi Rating
Packer Tire
480 x 400 x 8
14-16 psi
Wing Castor
(Front and Rear)
11 L 15 SL STUBBLE PROOF
58 psi
Main Frame Castor
(Front)
11 L 15 HIGHWAY
76 psi
Main Frame Castor
(Front)
19.0 / 45 x 17
58 psi
Rear Axle Tire
500 / 45 x 22.5
52 psi
Rear Axle Tire
30.5 L 32 SAT (Single)
26 psi
Rear Axle Tire
30.5 L 32 SAT (Inner Dual)
26 psi
Rear Axle Tire
30.5 L 32 SAT (Outer Dual)
16 psi
Circuit
Flow Rate (Intermittent)
Circuit #1 (Shank)
Base Block
16-18 US-gal/min (60.5-68.1 L/min)
Circuit #1 (Shank)
SCT Block
26-32 US-gal/min (98.4-121.1 L/min)
Circuit
Flow Rate (Continuous)
Circuit #2 (Wing)
3-4 US-gal/min (11.3-18.9 L/min)
Circuit #2
SBR Hitch
(option)
2-3 US-gal/min (7.6-11.3 L/min)
Low Pressure
Return Line(s)
3-5 US-gal/min (11.3-18.9 L/min)