Seca 665 - Manual (Page 100)

100 •
The current content of the calibration counter flas-
hes in the display for a few seconds.
3. Compare the content of the calibration counter out-
put with the number given on the calibration coun-
ter sticker.
Both numbers have to match for the calibration to be
valid. If the sticker and the calibration counter do not
match, the scale must be recalibrated. Please contact
your service partner or seca service. Once the scale has
been recalibrated, a new, updated calibration counter
sticker is used to identify the status of the calibration
counter. The person authorized to perform the recalib-
ration secures this sticker with an additional seal. The
calibration counter sticker can be ordered from seca
service.
12.TECHNICAL DATA
12.1 General technical data
General technical data seca 665
Dimensions of scale
• Depth
• Width
• Height 1150 mm
1102 mm
912 mm
Dimensions of weighing platform
• Depth
• Width
• Height 930 mm
760 mm
55 mm
Net weight approx. 32 kg
Temperature range
• Operation
• Storage
• Transport +10 °C to +40 °C / +50 °F to 104 °F
-10 °C to +65 °C / +14 °F to 149 °F
-10 °C to +65 °C / +14 °F to 149 °F
Air pressure
• Operation
• Storage
• Transport 700-1060 hPa
700-1060 hPa
700-1060 hPa
Humidity
• Operation
• Storage
• Transport 30 % - 80 % no condensation
0 % - 95 % no condensation
0 % - 95 % no condensation