Detection of equipment devices, 2 operate scales in a wireless group (menu), Activate wireless module (sys) – Seca 704 User Manual
Page 58: Detection of equipment devices 58, 2 operate scales in a wireless, Group (menu), 2 operate scales in a, Wireless group (menu)
58 •
Detection of equipment
devices
If you wish to set up a wireless group with the scales,
they will search for other active devices from the
seca 360° wireless
system. The devices detected are
shown as modules in the display on the scales (e.g.
MO 3). The meaning of the numbers is as follows:
• 1: Personal scales
• 2: Length measuring device
• 3: Wireless printer
• 4: PC with seca USB wireless module
• 7: Baby scales
• 5, 6 and 8-12: Reserved for system expansion
7.2
Operate scales in a
wireless group (menu)
All functions required to operate the device in a
seca wireless group can be found in the submenu "rF".
Information how to navigate in the menu can be found
on page 52.
Activate wireless
module (SYS)
The device is supplied with the wireless module disa-
bled. It has to be activated before you can set up a
wireless group.
NOTE:
When the wireless module is activated, the
power consumption of the device will increase.
We recommend using a power supply unit
when operating the device in a wireless net-
work.
1. Switch the device on.
Reg. Devices (M)
•
Channel 1 (C1)
•
Channel 2 (C2)
•
Channel 3 (C3)
Stop
rF
Group (ID)
Autosend
•
on
•
off
Autoprint
•
HI
•
MA
•
HI_MA
•
off
Time
•
Year
•
Month
•
Day
•
Hour
•
Minute
……
System
•
on
•
off
……
learn