Seca 704 - Manual (Page 51)

Operation • 51
English
Calculate and print out
BMI automatically
If you use these scales with a wireless printer and a
length measuring device from the
seca 360° wireless
system, you can calculate and print out the BMI auto-
matically.
NOTE:
The prerequisite for this function is that the
equipment devices are logged into a wireless
group (see "seca 360° wireless Network" on
page 56).
1. Carry out weighing.
2. Briefly press the Enter key (send/print) on the
scales.
The measured value is sent to the wireless printer
but not printed out.
3. Measure the height.
4. Hold down the Enter key (send/print) on the length
measuring device.
The measured value is sent to the wireless printer.
The BMI is calculated.
The height, weight and BMI will be printed out.
Transmit measured
results to a radio
receiver
If the scales are integrated in a seca 360° wireless net-
work, you can transmit the measured results to
receive-ready equipment (wireless printer, PC with
wireless USB module) at the touch of a button.
 Press the Enter key (send/print).
– Press key briefly: Send measured results to
all receive-ready equipment
– Hold down: Print out measured result using
wireless printer
Switch off scales  Press the Start key.
NOTE:
When in battery mode, the scales will switch off
automatically after a short period if no load is
placed on them.
Over 30
The patient urgently needs to lose weight as this is put-
ting a strain on the metabolism, circulation and skeleton.
The recommendation is for careful adherence to a diet,
plenty of exercise and behavioural training. If in doubt, a
medical specialist should be consulted.
BMI Evaluation