Seca 955 - Manual (Page 5)

Model 955 5 GB
Notes
• Follow the safety instructions in the
instruction manual.
• Keep the operating manual and the
declaration of conformity contained
therein in a safe place.
• Have scale serviced and re-calibrated
on a regular basis (see “Servicing/recal-
ibration” on page 13).
• Be sure to use only the seca mains unit
supplied. Before plugging the mains
unit into a socket, check that the mains
voltage indicated on the mains unit
matches local mains voltage.
• Ensure that the cables are not crushed
and do not come into contact with hot
objects.
• Use only the type of battery stated (see
“Spare parts and accessories” on
page 14).
3. Before you start…
Unpacking
The scope of supply includes:
• Chair scale comes complete assembled
• 1 seca mains unit
• 1 rechargeable battery pack
• 1 set of operating instructions
Power supply
The scale is powered by a mains unit and by rechargeable batteries.
Connecting the rechargeable battery pack:
– Open the battery compartment in the
base of the display housing.
– Connect the plug contacts to the re-
chargeable battery pack.
– Close the lid of the battery compart-
ment again.
The LC display and the evaluation electronics have a low power consumption – 1,000
weighing operations can be performed with a fully charged battery.
Once battery voltage is no longer adequate, the battery symbol
first appears in
the display to indicate that battery power is dropping.
If the batteries are not charged, battery voltage will ultimately not be adequate for error-
free measuring. In this case,
bAtt appears in the display and weighing is no longer
possible.