SANDPIPER W15 - Manual (Page 6)

7/04 520-150-000 Models W09 & W15 Page 6
ITEM TOTAL
NO. PART NUMBER DESCRIPTION RQD.
338-005-360 Flap Valve 4
338-010-354 Flap Valve 4
40 518-113-010 Manifold, Discharge & Suction 2
41 980-004-115 Yoke, Handle 4
42 570-001-365 Pad, Hinge - Flap Valve 4
(Not used with Santoprene)
570-001-364 Pad, Hinge - Flap Valve 4
(Not used with Santoprene)
570-001-360 Pad, Hinge - Flap Valve 4
(Not used with Santoprene)
43 670-044-110 Retainer, Flap Valve 4
44 675-013-365 Ring, Sealing 4
675-013-364 Ring, Sealing 4
675-013-360 Ring, Sealing 4
45 722-071-360 Seat, Flap Valve 4
722-071-363 Seat, Flap Valve 4
722-071-364 Seat, Flap Valve 4
46 807-016-115 Stud, Outer (Chamber) 20
47 807-018-110 Stud (Flap Retaining) 8
48 538-080-115 Pipe Nipple (Shut-Off Valve) 2
49 893-013-162 Shut-Off Valve 2
49A 405-008-000 Valve Handle 2
50 545-007-115 Nut, Hex (Chamber at Feet) 8
51 900-006-115 Washer, Lock 20
52 547-002-110 Nut, Stop 8
53 542-015-115 Stud Nut Assembly 4
54 530-008-000 Muffler, Exhaust 1
55 560-023-360 O-Ring (Spool Pin) 2
56 538-082-335 Pipe Nipple 2
57A 334-095-010 Flange (W09-2 Only) 2
57B 334-094-010 Flange (W09-3 Only) 2
58 570-014-371 Wear pad 2
59 170-058-115 Capscrew, Hex Head (Mounting Feet) 4
60 210-008-330 Safety Clip 1
61 170-031-115 Hex Head Capscrew (Elbows) 8
62 901-035-115 Washer, Flat 4
(in place of hinge pad - for use
w/Santoprene only)
64 478-007-115 Locking Knob 24
65 560-012-360 O-Ring (Clean-Out) 4
66 165-063-010 Clean-Out Cap 4
67 200-054-015 Clean-Out Clamp Assembly 4
68 542-014-115 Stud Nut Assembly 8
Not Shown:
535-069-000 Name Plate 1
705-001-330 Drive Screw 2
535-037-000 Caution Plate 4
930-009-115 Handle Wrench 1
031-067-010 Main Air Valve Assembly 1
(Includes Items 9,10,11,13,14,15,
16,60)
705-001-330 Drive Screw (Cleanout Clamp) 2
Repair Parts shown in bold face (darker)
type are more likely to need replacement
after extended periods of normal use.
They are readily available from most
Warren Rupp distributors. The pump
owner may prefer to maintain a limited
inventory of these parts in his own stock
to reduce repair downtime to a minimum.
IMPORTANT: When ordering repair parts
always furnish pump model number,
serial number and type number.
MATERIAL CODES
The Last 3 Digits of Part Number
Continued from previous page
375…Fluorinated Nitrile
378…High density Polypropylene
379…Conductive Nitrile
405…Cellulose Fibre
408…Cork and Neoprene
425…Compressed Fibre
426…Blue Gard
440…Vegetable Fibre
465…Fibre
500…Delrin 500
501…Delrin 570
505…Acrylic Resin Plastic
520…Injection Molded PVDF Natural Color
540…Nylon
541…Nylon
542…Nylon
544…Nylon Injection Molded
550…Polyethylene
551…Polypropylene
552…Unfilled Polypropylene
553…Unfilled Polypropylene
555…Polyvinyl Chloride
570…Rulon II
580…Ryton
590…Valox
591…Nylatron G-S
592…Nylatron NSB
600…PTFE (virgin material) Tetrafluoroethylene (TFE)
601…PTFE (Bronze and moly filled)
602…Filled PTFE
603…Blue Gylon
604…PTFE
606…PTFE
610…PTFE Encapsulated Silicon
611…PTFE Encapsulated Viton
Delrin, Viton and Hytrel are registered tradenames of E.I.
DuPont.
Gylon is a registered tradename of Garlock. Inc.
Nylatron is a registered tradename of Polymer Corp.
Rulon II is a registered tradename of Dixion Industries
Corporation.
Hastelloy-C is a registered tradename of Cabot Corp.
Ryton is a registered tradename of Phillips Chemical
Company.
Valox is a registered tradename of General Electric
Company.
Kynar ® is a registered tradename of ATOFINA
Chemicals, Inc.
Warren Rupp, Rupplon, SANDPIPER, PortaPump,
Tranquilizer, and SludgeMaster are registered
tradenames of Warren Rupp Inc.