Apple Multiple Scan 15 AV Display (15-inch CRT) - Manual (Page 18)

Note: If the power light is yellow or amber, one of the following may be the
cause:
m The computer isn’t turned on.
m The monitor’s cable isn’t connected properly to the computer.
m The video circuitry or video card in your computer is not compatible with
the monitor. Y our Macintosh may need a video card or adapter to use the
monitor. See “Do You Need a Video Card?” earlier in this chapter.
m The computer and monitor are in sleep to conserve energy. See
“Conserving Energy” in Chapter 2.
To make full use of the features available to you with this monitor, you should
install the display software. Follow the instructions in “Installing the Display
Software,” next.
Installing the display software
To install the display software for the Multiple Scan 15 AV Display, follow
these steps:
1 Insert the Apple Multiple Scan Software for Macintosh disk into a floppy disk drive.
The disk’s icon appears on the desktop.
2 Double-click the disk icon to open it.
3 Double-click the Installer icon to start the Installer program.
After a moment, the Installer opens and you see the Welcome screen.
12 Chapter 1