Apple Multiple Scan 15 AV Display (15-inch CRT) - Manual (Page 17)

Connecting headphones to your monitor
If you wish, you can plug a pair of headphones (or other sound output device)
into the Multiple Scan 15
AV Display. To plug your headphones into the
monitor, follow these steps:
1 If your headphones are attached to the sound output port (marked by
-
) on the back of
your computer, unplug them.
2 If the sound cable that came with the Multiple Scan 15 AV Display is not connected,
connect it to the sound output port on the computer and on the monitor. (Both sound
output ports are marked by
-
).
3 Plug the headphones into the headphone port (marked by
f
) on the front of the monitor.
When headphones are plugged in, you do not hear sound through the stereo
speakers. Sound and music play through the headphones only.
Turning the monitor on
To turn on the monitor for the first time:
1 Start up your computer.
2 Press the Power button on the front right side of the monitor.
The green power indicator light goes on.
If the green light does not go on, press the power switch again. If this doesn’t
work, make sure you’ve connected the monitor to your computer properly (see
“Connecting the Monitor to Your Computer,” earlier in this chapter) and make
sure the monitor is plugged into a working electrical outlet. Also, make sure
your computer is turned on.
I f
Power button Power indicator light
11 Setting Up