Apple Multiple Scan 15 AV Display (15-inch CRT) - Manual (Page 14)

Do you need a video card?
To use the Multiple Scan 15 AV Display, you need compatible video circuitry
built into your computer or a compatible video card installed in your
computer. If you are unsure whether your computer has the appropriate built-
in video capability, check the technical specifications that came with your
computer or check with an Apple-authorized dealer or service provider.
If your computer does not have built-in video capability, you need to install a
video card (available from an Apple-authorized dealer or service provider).
Depending on your computer model, you will need either a NuBus
™ card or a
PCI card. You should install the video card before you connect the monitor to
your computer. For instructions on installing a card inside your computer, see
the manual that came with your computer or video card.
Do you need an adapter?
Some Macintosh computer models and some video cards from manufacturers
other than Apple require an adapter to connect the monitor to the computer.
Adapters are available from an Apple-authorized dealer or service provider.
Using more than one monitor
If your computer has NuBus or PCI expansion slots, you can connect
additional monitors to your computer. You may need to install a video card
for each additional monitor you are using. See the documentation that came
with your computer for information on working with additional monitors.
8 Chapter 1