Apple Multiple Scan 15 AV Display (15-inch CRT) - Manual (Page 15)

Connecting the monitor to your computer
Follow these steps to connect the Multiple Scan 15 AV Display to your
computer:
IMPORTANT Before you connect any cords or cables, make sure that your
computer is turned off and unplugged.
1 Connect the socket end of the power cord to the power cord receptacle on the back of
the monitor.
F
≤
_
WARNING Your monitor is equipped with a three-wire grounding plug—
a plug that has a third (grounding) pin. This plug will fit only a
grounded AC outlet. This is a safety feature. If you are unable to insert
the plug into the outlet, contact a licensed electrician to replace the
outlet with a properly grounded outlet. Do not defeat the purpose of the
grounding plug!
9 Setting Up