LumaSense Technologies MIKRON M7816 - Manual (Page 4)

Accessing the Quick Menu Functions
The M7816 offers quick access to a number of features
using the joystick.
The quick menu functions are as follows:
Feature Function
Range The M7816 provides a total of two
temperature ranges. These two ranges
provide an overall temperature span of
-20°C to 500°C (-4°F to 932°F).
Average Signal to Noise improvement (Off, ∑2,
∑8, ∑16)
Color Allows you to switch between a color
display and a monochrome display.
Page Allows you to scroll through images
that have been saved to the camera’s
internal memory
JOYSTICK BUTTON AND FUNCTIONALITY
1) Press the JOYSTICK button to gain access to the
M7816 quick menu functions.
[QUICK MENU OPTION HIGHLIGHTED]
2) Press the JOYSTICK again until the desired quick
menu option becomes highlighted on the display.
3) Toggle the JOYSTICK up or down as needed to scroll
through the values and select the desired value.
4) Press the MENU button to return to the main display.
Switching Between the Color and Mono-
chrome Display
The instrument has the capability of switching back and
forth between a color and monochrome display.
1) Press the
JOYSTICK button to gain access to the
M7816 quick menu functions.
2) Press the JOYSTICK button again until the palette bar
becomes highlighted.
[PALETTE BAR HIGHLIGHTED]
3) Toggle the JOYSTICK up or down to switch between
the color display and the monochrome display.
The M7816 also allows one to choose black and
white as the preferred color palette for focusing.
Refer to the operator’s manual for more informa-
tion on setting the focus mode option.
Toggling between Run and Freeze Modes
The M7816 on board processing software allows images
to be viewed at a rate of 60 frames per second in the
run mode. Because the run mode operates in real-time,
the time clock, image, and image data are continuously
updated.
The software also allows the image to be frozen, stop-
ping the time clock and allowing more time for viewing
and analyzing data associated with a single image frame.
Trigger Button
1) Verify FREEZE has been selected as the
TRIGGER KEY option in the INITIAL Setup Menu.
2) Press and release the TRIGGER button to place the
camera into Freeze Mode.
The display will flash the visible light image momen-
tarily before entering the Freeze Mode.
Adjusting the Focus
1) With the hand that is not holding the camera, move
the Focus Adjustment Lever on the front of the
camera clockwise (to the user). The focal distance
increases towards the range of infinity.
Manual Focus
Ring
Manual Focus
Lever