LT Security LTD2308SE-B - Manual (Page 42)

Digital Video Recorder User Manual
36
Server port: communication port
Step3: After selecting the "Obtain an IP address automatically", the device will distribute IP address, subnet mask, and gateway
IP and DNS server.
Step4: enable PPPoE to directly connect the DVR to internet via ADSL and then input the user name and password; click TEST
button to test the effectiveness of the relevant information.
Fig 4-29 network configuration-network
4.6.2 Sub stream
Step1: enter into system configurationnetwork configurationsub stream; refer to Fig 4-30:
Step2: select fps, resolution, quality.
Step3: user can also setup all channels with same parameters.