LT Security LTD2308SE-B - Manual (Page 37)

Digital Video Recorder User Manual
31
Fig 4-20 alarm configuration-sensor-alarm handling Fig 4-21 alarm handling-trigger
Step3: After selecting Buzzer, there will be triggered buzzer alarm out;
Full screen alarm: when triggered alarm, there will pop up full screen alarm;
Email: tick of this function. When an alarm trigged, a notification email will be sent to user
‟s designed email box including
trigger events, time, snap pictures, device name, ID camera name etc.
Snap: Select channels. When an alarm is trigged, the system will automatically save the captured pictures from the selected
channel. If user tick off Email function, these pictures will also be sent to user
‟s designed email box.
To alarm out: When selecting the channel, there will be triggered alarm out in the designated channel. Click OK button to save
the setting; click Exit button to exit the current interface.
To record: tick off recoding channels. It will record the camera when alarm triggered. Click OK button to save the setting; click
Exit button to exit the current interface.
To P.T.Z: set linked preset and cruise for alarm. User can select any channel and multi channels as linked channels. Click OK
button to save the setting; click Exit button to exit the current interface.
Step4: user can also setup all channels with same parameters.
Step5: click
“default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
interface.
③ Schedule
Step1: enter into system configurationalarm configurationsensorschedule; refer to Fig 4-22:
Step2: the setup steps of sensor schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details.