LT Security LTD2308SE-B - Manual (Page 41)

Digital Video Recorder User Manual
35
4.5.5 Alarm out
Alarm out includes three sub menus: alarm out, schedule and buzzer
① Alarm out
Step1: enter into system configurationalarm out; refer to Fig 4-28:
Step2: in this interface, set relay alarm out name, select hold time which means the
interval time between the two adjacent alarms.
Step3: user can setup all channels with same parameters. Tick off “all” to do relevant
setup.
② Step4: click
“apply” button to save the setting; click “exit” button to exit current
interface. Fig 4-28 system configuration-alarm
out
③ Schedule
Step1: enter into system configurationschedule;
Step2: the setup steps of alarm out schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details.
Note: the default schedule of motion detection is full-selected, that is, the color of schedule setting interface is blue.
④ Buzzer
Step1: enter into system configurationbuzzer;
Step2: tick off Buzzer, set buzzer alarm hold time
4.6 Network configuration
Network configuration includes five submenus: network, sub stream, Email, server and other settings.
4.6.1 Network
Step1: enter into system configurationnetwork
configurationnetwork; refer to Fig4-29:
Step2: HTTP port: the default value is 80. If the value changed, user needs to add the port number when typing IP address in IE
address blank .i.e. set HTTP port to 82, IP address: http://192.168.0.25, user needs to input that address:
http://192.168.0.25:82 into IE browser.