LT Security LTD2308SE-B - Manual (Page 33)

Digital Video Recorder User Manual
27
Step2: tick off camera name, time stamp; click Setting button, and then user can use cursor to drag the camera name and time
stamp in random positions. Please refer to below Figures:
Before drag after drag
Step3: user can also setup all channels with same parameters.
Step4: click
“default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
interface.
4.3.5 Recycle record
Step1: enter into system configurationrecord configurationrecycle record;
Step2: tick off recycle record to enable the recycle record function. It will cover the earlier recorded files and keep recoding
when HDD is full; if disenabled, it will stop recording when HDD is full.
Step3: click
“default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
interface.
4.3.6 Snap
In this interface, User can set up Resolution, quality, snap interval, snap number.
4.4 Schedule configuration
Schedule configuration includes three sub menus: schedule, motion and alarm.