Lincoln Electric IM586 STT-10 Head & Controls - Manual (Page 29)

C-3 ACCESSORIES C-3
Coil Adapter:
K1504-1 Permits 50 lb to 60 lb (22.7-27.2 Kg.)
Coils to be mounted on 2: (51 mm) O.D. spindles.
K435 Permits 14 lb. (6 kg) Innershield coils to be
mounted on 2" (51 mm) O.D. spindles.
K468 Permits 8" (203 mm) O.D. spools to be
mounted on 2" (51 mm) O.D. spindles. :
K363P Adapts Lincoln Readi-Reel coils of elec-
trode 30 lb. (14 kg) and 22 lb. (10 kg) to a 2" (51
mm) spindle. Durable molded plastic one piece con-
struction. Designed for easy loading; adapter
remains on spindle for quick changeover.
K438 Adapts Lincoln Readi-Reel coils of electrode
50-60 lb. (22.7-27.2 kg) to a 2" (51 mm) spindle.
GUN ADAPTERS (FOR 10 SERIES
WIRE DRIVE HEADS)
The STT-10 wire feeder is equipped with a factory
installed K1500-2 gun connection kit. This kit is for
guns having a Tweco #2-#4 type connector. The STT-
10 has been designed to make connecting a variety of
guns easy and inexpensive with the K1500 series of
gun connection kits. Gun trigger and dual procedure
lead connections connect to the single 5 pin recepta-
cle on the front of the feed head box.
MAGNUM 200/300/400 GUNS
The easiest and least expensive way to use Magnum
200/300/400 guns with the STT-10 wire feeder is to
order them with the K466-2 connector kit, or to buy a
completely assembled Magnum gun having the K466-
2 connector (such as the K497-21,-22,-23 dedicated
Magnum 400 guns and the K497-20,-21 dedicated
Magnum 200 guns).
MAGNUM 550 GUNS
The easiest and least expensive way to use the
Magnum 550 guns with STT-10 wire feeders is to
order the gun with the K613-2 connector kit, and
install a K1500-3 gun connection kit to the wire feeder.
LINCOLN INNERSHIELD AND SUB ARC GUNS
All of these guns can be connected to the STT-10 by
using the K1500-1 Adapter Kit.
LINCOLN FUME EXTRACTION GUNS
The K556 (250XA) and K566 (400XA) guns require
that a K489-7 Fast-Mate adapter kit be installed.
K206, K289, and K309
require only the installation of a K1500-1 connector in
the STT-10 wire feeder.
NON-LINCOLN GUNS
Most competitive guns can be connected to the STT-
10 by using one of the K1500 series adapter kits,
shown in the following column.
Gun Receiver Bushings and Gun Adapters
K489-7 (Dual Schedule Fast-Mate Adapter)
This adapter installs directly into the wire drive feed-
plate, to provide for use of guns with Fast-Mate or
European style gun connections. This K489-7 will
handle both standard Fast-Mate and Dual Schedule
Fast-Mate guns.
K1500-1 (Lincoln Innershield gun standard connection)
Use this kit to connect the following guns: Guns hav-
ing a Lincoln standard innershield gun connector,
Magnum 200/300/400 with K466-1 connector kit, and
Magnum 550 guns with the K613-1 gun connection
kit.
K1500-2 (Tweco #2-#4 type connection)
The K1500-2 gun adapter comes factory installed on
the STT-10 wire feeder. Use this adapter for guns that
have a Tweco #2-#4 connector. Such guns include
Magnum 200/300/400 guns with K466-2 connector kit,
and completely factory assembled Magnum guns that
are factory equipped with the K466-2 connector (such
as the K471-21, -22, and -23 dedicated Magnum 400
guns and the K497-20 and -21 Magnum 200 guns).
K1500-3 (Tweco #5 connection)
For Magnum 550 gun with K613-2 Connection Kit,
and any other gun having a Tweco #5 connector .
K1500-4 (Miller connection)
For any gun having a newer style Miller connector.
STT-10