Elitegroup L372N1 - Manual (Page 48)

chapter 3 upgrading your computer
3-3
Upgrading the Hard Disk Drive
To replace the hard disk drive, do the following:
1. Turn OFF the computer. Unhook the power cord and all
cables/devices attached to the computer.
2. Place your hand on a large metal object momentarily to
discharge any static electricity.
3. Locate the hard disk drive access door on the backside
of the computer.
4. Unscrew Screw-A and remove the HDD Access Door.
Screw A
HDD Access Door
5. Remove 4 Screw-B’s. The actual HDD is attached to a
metal frame.