Elitegroup L372N1 - Manual (Page 17)

chapter 1 getting to know the basics
1-9
Additional memory module can be installed in the DIMM
sockets to increase system memory. Go to Chapter 4 to learn
how to install additional DIMM module.
4. Multi-Device Bay
Depending on the options that the system is bundled with, a
standard FDD drive or an additional optical drive (which may be
CD-RW drive) can be installed in this bay. This is a factory
option and is not user-upgradeable.
5. Power Jack (DC-in)
The DC-out jack of the AC Adapter connects here and powers
the computer.
6. Ventilation Grill
The fan grill is where hot air is vented. Do not block this airway
completely.
7. Stand With a Tilt-able Head
The stand supports the computer. The stand also features a
tilt-able mechanism that allows you to tilt the computer to a
comfortable viewing angle.
8. Firewire / IEEE1394 Port
You may connect any Fire-wire-ready device to this port. The
6-pin IEEE1394 connector does not provide power to the
attached device; this port is for data transfer only.
9. S/PDIF Port
The special optical port carries digital audio signal. You may