Elitegroup L372N1 - Manual (Page 43)

chapter 2 bios setup and security feature
2-8
Password
Check Setup
Always [Setup]:
To enable the password check function
every time when BIOS Setup is
executed.
[Always]:
To enable the password check function
every time the system boots.
TV Display
Type NTSC
PAL Select the TV output format appropriate
for your country’s TV system.
Note: If you select Ethernet, the system will attempt to boot from the network.
Power Management Setup
Item Selections /
Sub-menu Description
Power Switch
Type On/Off
Suspend [On/Off]: Turn off the system when the
power button is pressed.
[Suspend]: Put the system in suspend
mode when the power button is pressed.
Suspend
Mode Disabled
Dram
Disk [Dram]: Power On Suspend.
The system will save its state to DRAM
and enter standby mode.
[Disk]: Save To Disk. The system will
save its state to disk and power off.
Note: The Suspend Mode selection in BIOS only applies to older Windows version
(such as Windows 3.1 or Windows 95 or NT4) or non-Windows operating system. In