Elitegroup 223 - Manual (Page 20)

12
Standard Version
¾ ¾ Use your hand to pull up the “frame LCD”.
¾ ¾ At any time you can tilt the display toward or away from you to a
comfortable viewing position.
¾ ¾ Press on the Power button to start your computer.
Optional Version
¾ ¾ Raise the LCD panel and follow the correct procedures as shown
on the illustration.
Please don’t raise the LCD panel from the middle part since
this is where the camera is located. The camera is a
sensitive device that a strong pull might cause damage to it.
¾ ¾ At any time you can tilt the display toward or away from you to a
comfortable viewing position.
¾ ¾ Press on the Power button to start your computer.
Important Notices
To avoid damage to the display panel:
¾ ¾ Try not to slam the display upon closing it.