Elitegroup 223 User Manual

Page 11

This device must not be operated in ad-hoc mode using channels
in the 5GHz bands in the European Community. Ad-hoc mode
provides a direct communication between two client devices
without a Wireless LAN Access Point.

This device must be used with Access Points that have employed and
activated a radar detection feature required for European Community
operation in the 5GHz bands. This device will operate under the
control of the Access Point in order to avoid operating on a channel
occupied by any radar system in the area. The presence of nearby
radar operation may result in temporary interruption in
communications of this device. The Access Point’s radar

You may consult with the local technical support staff responsible for
the wireless network to ensure the Access Point device(s) are properly
configured for European Community operation.

Safety Precautions

This section is designed to assist you in identifying potentially unsafe
conditions while working with this product. Required safety features
have been installed in the computer to protect you from injury.
However, you should use good judgment to identify potential safety
hazards:
1.

Please read these safety instructions carefully.

Please keep this User's Manual for later reference.

Please disconnect this equipment from AC outlet before
cleaning. Don't use liquid or sprayed detergent for cleaning.
Use moisture sheet or cloth for cleaning.

For pluggable equipment, that the socket-outlet shall be
installed near the equipment and shall be easily accessible.

Please keep this equipment from humidity.

Lay this equipment on a reliable surface when installed. A
drop or fall could cause injury.

Make sure to use the right voltage for the power source when
connecting the equipment to the power outlet.

Place the power cord in such a way that people can not step on
it. Do not place anything on top of the power cord.

All cautions and warnings on the equipment should be noted.

10.

If the equipment is not use for a long time, disconnect the
equipment from the main power outlet to avoid being damaged
by transient overvoltage.

11.

Never pour any liquid into the opening, this could cause fire or
electrical shock.