Elitegroup G220 User Manual - Manual (Page 19)

Raise the LCD panel and follow the correct procedures as shown on the illustration.
Please don’t raise the LCD panel from the middle part since this is where the camera is
located. The camera is a sensitive device that a strong pull might cause damage to it.
At any time you can tilt the display toward or away from you to a comfortable viewing
position.
Press on the Power button to start your computer.
Important Notices
To avoid damage to the display panel:
Try not to slam the display upon closing it.
For optional model with camera: Please raise down the LCD panel carefully with your hand
assisting the panel until it touches down. Try not to slam the display when closing it, this
might damage the built-in camera.
There is a magnetic sensor on the lower right hand of the LCD panel (inside the speaker)
that will detect the “Lid Switch IC” and shut down the system.
Try not to place any object on top when it is closed or open.
Be sure the system is turned off before you close the display panel.
With the LCD screen open, you will see several features important for operating your Notebook
computer.
11