Elitegroup A900 (V2.1) - Manual (Page 40)

5.
6.
7.
Remove the new hard drive from its anti-static bag. You can use
the same anti-static bag to store your old hard drive.
To install the new hard drive, align the tabs on the drive bracket
with the slots on the bay and press it gently ease the drive into
the bay. Slide the drive until it iengages with the system.
Slide the compartment cover into place. Be sure that the screw
holes on the cover align completely with the screw holes in the
case and secure the cover with the two screws.
The CD-ROM
Features of the CD-ROM Module
The features of the CD-ROM drive are listed below.
• The Audio Play feature allows you to play music CDs
• Front panel load/unload button
• Supports CD-DA, CD-ROM mode 1 and mode 2, Multi-Session
Photo CD™, CD-I/Video CD (pcs.)
• Low power consumption
• 12.7mm height
Precautions for Handling CD-ROM Discs
• Always hold the disc by the edges, avoid touching the surface.
• Use a clean, dry, cloth to remove dust, smudges, or fingerprints.
Wipe from the center outward.
• Do not write or place objects on the surface of the disc.
• Store discs in a cool dry place not to damage the disc.
• Do not use benzene, thinners, or cleaners with detergent. Only
use CD-ROM cleaning kits.
• Do not bend or drop the discs.
26