Elitegroup A900 (V2.1) User Manual
Page 10
c.
d.
e.
f.
14.
15.
16.
17.
The equipment has been exposed to moisture.
The equipment has not work well or you can not get it work
according to the user's manual.
The equipment has dropped and damaged.
If the equipment has obvious sign of breakage.
Do not leave this equipment in an environment unconditioned,
storage temperature above 60°C (140°F), it may damage the
equipment.
The unit can be operated at an ambient temperature of max. 35°C.
The sound pressure level at the operators position according to
IEC 704-1: 1982 is equal or less than 70 dB(A).
Power Cord Requirements
The power cord set used with the AC adaptor must meet the
requirements of the country where you use the AC adaptor,
whether it is 100-120 or 200-240 Vac. The following information
explains the requirements for power cord set selection.
The cord set must be approved for the country in which it is
used.
The appliance coupler must have a configuration for mating
with a CEE22/EN6032/IEC 320 appliance inlet.
A. For U.S. and Canada:
The cord set must be UL Listed and CSA Certified.
The minimum specifications for the flexible cord are No. 18
AWG.
B. For Japan:
All components of the cord set must bear a “ T ” mark and
registration number in accordance with the Japanese Dentori
Law.
The minimum specifications for the flexible cord are .75m ㎡
conductors.
C. For Other Countries:
viii