Regulatory compliance – Brocade FCoE Switch Module for IBM BladeCenter Installation and User’s Guide User Manual

Page 69

Appendix C. Product Specifications

The switch module meets or exceeds the Fibre Channel standards compliance, performance, and
feature capabilities as defined in the following standards when in NPIV mode (Access Gateway):

Regulatory Compliance

The high speed switch module has been approved for use only in the IBM BladeCenter H or
BladeCenter HT product as a component by TUV.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

•

FC-GS-5 ANSI INCITS 427:2006
(includes the following)

•

FC-GS-4 ANSI INCITS 387:2004

•

FC-IFR Rev 1

•

FC-SW-4 INCITS 418:2006 (includes
the following)

•

FC-SW-3 INCITS 384:2004

•

FC-VI INCITS 357:2002

•

FC-TAPE INCITS TR-24:1999

•

FC-DA INCITS TR-36:2004 (includes
the following)

•

FC-FLA INCITS TR-20:1998

•

FC-PLDA INCITS S TR-19:1998

•

FC-MI-2 ANSI INCITS TR-39:2005

•

FC-PI INCITS 352:2002

•

FC-PI-2 INCITS 404-2005

•

FC-FS-2 ANSI INCITS 424:2006 (includes the
following)

•

FC-FS INCITS 372:2003

•

FC-LS rev 1.51 (under development)

•

FC-BB-3 INCITS 414:2006 (includes the following)

•

FC-BB-2 INCITS 372:2003

•

FC-SB-3 INCITS 374:2003 (replaces FC-SB ANSI
X3.271:1996; FC-SB-2 INCITS 374:2001)

•

RFC-2625 IP and ARP over FC

•

RFC 2837 Fabric Element MIB

•

MIB-FA INCITS TR-32:2003

•

FCP-2 INCITS 350:2003 (replaces FCP ANSI
X3.269:1996)

•

SNIA Storage Management Initiative Specification
(SMI-S) ver 1.2 (includes the following)

•

SNIA SMI-S ver 1.02 (ANSI INCITS 388:2004)

•

SNIA SMI-S ver 1.1.0

•