Attaching the rear brackets to the rack posts – Brocade Fixed Rack Mount Kit Installation Procedure (Supporting VA-40FC, VDX 6710-54, VDX 6720-24, VDX 6720-60, VDX 6730-32, and VDX 6730-76) User Manual
Page 12

12 of 12
Fixed Rack Mount Kit Installation Procedure
53-1001274-06
Attaching the rear brackets to the rack posts
Complete the following steps to attach the rear brackets to the rack posts.
1. Attach the right rear bracket to the right rear rack post using two 10-32 x 5/8-in. screws and two retainer nuts,
as shown in
2. Attach the left rear bracket to the left rear rack post using two 10-32 x 5/8-in. screws and two retainer nuts.
3. Tighten all the 10-32 x 5/8-in. screws to a torque of 25 in-lbs (29 cm-kgs).
FIGURE 5
Attaching the rear bracket to the rack post
1
Bracket, front right
3
Retainer nut, 10-32
2
Bracket, rear right
4
Screw, 10-32 x 5/8-in., panhead Phillips
This manual is related to the following products: