Anthro Zido Cart Assembly Instructions - Manual (Page 4)

4 Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
*300-5404-00*
300-5404-00
steP 3
Assemble the top
¡ Place the cap shelf upside down on a non-marring
surface. Locate the bracket. The bottom of the
bracket is flat and has no sticker. The top of the
bracket has a sticker that says "TOP" and has bumps
with threads inside. The bumps on the top of the
bracket nest inside the holes on the cap shelf. Place
the bracket upside down on the shelf so that the holes
on the bracket line up with the holes on the bottom of
the shelf. Using the eight non-threaded holes around
the outside of the bracket, attach the shelf to the
bracket with eight wood screws. Use the 5/32" hex
driver.
¡ If you have purchased a Zido Handle for this
configuration, install it now. If any of your accessories
require that you drill the shelf, do that now.
steP 4
install the top Assembly
¡ Set the top assembly onto the top of the base assembly
so that the cap shelf extends over the front of the base.
¡ Secure with four 1/2" socket head screws.
Be sure to drive the screws by hand using the
ball driver provided.
¡ Double-check the alignment of the cap shelf with the
column and the base. Rotate the column if needed, then
tighten the 3/4" screws that connect the column to the
base.
3/4" Wood Screw
325-5106-00
congrAtulAtions! your Zido cArt Assembly is comPlete!
1/2" Socket Hd Screw
325-5455-00
Anthro Corporation ® | 10450 SW Manhasset Dr. | Tualatin, OR 97062
Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: [email protected] | anthro.com
Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409
warranty:
Zido carts have a Lifetime Warranty; the cylinder has a five-year warranty.
notices:
Technology Furniture and Zido are trademarks of Anthro Corporation. Anthro reserves the right to modify the design and specifications without prior notice.