Anthro Zido Cart Assembly Instructions - Manual (Page 2)

welcome
Thank you for purchasing Zido. If you
have any questions or if we can help
you in any way, please contact us at
800.325.3841.
PArts list
Before beginning assembly of your Zido
cart please review the parts list to verify
that your shipment is complete.
All Screw quantities listed here are the
minimum needed for your Zido assembly.
There may be a few extra Screws included
which are not counted in the Parts List.
To make the assembly of your Zido even
easier, we have included the required
tools. The handy Hex Driver Bit can be
used in your electric drill in place of the
Hex Driver.
2
Zido cart Quantity Part number
01 Base
Small, 22" wide 1 250-3064-00
Large, 25" wide 1 250-3065-00
02 Tube
24" long (for 31” high cart) 1 500-1031-00
28" long (for 35” high cart) 1 500-1030-00
33" long (for 40” high cart) 1 500-1032-00
03 Cap Shelf
22” wide 1 101-1025-06-50
25” wide 1 101-1026-06-50
04 Casters
4” Locking 2 150-5011-03
4” Non-locking 2 150-5010-03
05 Tapped Strip 1 225-2621-00
06 Cap Shelf Bracket 1 225-2620-00
07 3/4" Flat Head Screw 2 325-5466-00
08 Wood Screws 8 325-5106-00
09 1/2" Socket Head Cap Screw 4 325-5455-00
Zido Pole cart Quantity Part number
01 Base 1 250-3065-00
02 Tube 1 125-4324-00
04 Casters
4” Locking 2 150-5011-03
4” Non-locking 2 150-5010-03
05 Tapped Strip 1 225-2621-00
3/4" Socket Head Cap Screw (not shown) 2 325-5461-00
End Cap (not shown) 1 175-5235-00
Product Quantity Part number
Hex Driver 5/32” 1 375-5000-00
(not shown)
Hex Driver Bit 5/32” 1 375-5003-00
(not shown)
06
01
02
03
04
05
07
08
09