Anthro CT Cart Spec Guide - Manual (Page 5)

CARL’S TABLE
26
Carl’
s
Table
fLAT pAnEL moniToR ARm
• These steel arms have a vertical travel range of 16" and rotate 360°. Travel range depends on the size of your monitor.
• Mount with either a C-clamp to the edge of your cart or drill through a shelf for added security. Clamp opens a maximum of 2" and
requires 3.5" of vertical clearance below the shelf.
• Arms extend up to 22" from their mounting point.
• Ten-year warranty against manufacturing defects.
• The Single-Standard and Single-Super Arms are available in Black (BK) and Silver Metallic (SM). Light is available in Black (BK).
PRODUCT
Supports Monitors Weighing Weight Part # Price
Single - Standard 7.5-25 lbs. 20 lbs. LCDxx $239*
Single - Super 13.5-44 lbs. 20 lbs. LCD2xx $289*
Single - Light 2-13.5 lbs. 20 lbs. 770BK $269.95*
QuickShip available for Standard and Super arms.
KEyBoARd SuRfACE REpLACEmEnT pAd
• If needed, replace the pad on the keyboard surface with this pad. The cushioned, easy-clean material matches the contour of your Carl’s
Table keyboard surface.
PRODUCT Weight Part # Price
Pad 8 lbs. 475DG $299.95
moniToR SuppoRT opTionS - foR CT03
• Customize your Carl’s Table CT03 with options to support and adjusts your monitors.
• need to support a heavy diagnostic monitor, up to 55 lbs? Choose the Large Diagnostic Monitor Mount for CT03. Sits at the center of the
monitor array and is supported by two of the four monitor arms.
• Want to adjust the height of a monitor individually, independent of the table height? Add the Flat Panel Height Adjuster for 9" of extra
adjustment to fine-tune your monitor’s position.
• Want to add more displays to your CT03? Add a Flat Panel Monitor Arm and attach it to CT03’s Coffee Surface. Perfect for RIS or voice
system monitors. Available in Black (BK) or Silver Metallic (SM).
PRODUCT Supports Monitors Weighing Weight Part # Price
Large Diagnostic Monitor Mount for CT03 Up to 55 lbs. 7 lbs. 735BK $109.95
Flat Panel Height Adjuster Up to 22 lbs. 4 lbs. 765SM $129.95
CT CART
• Strong CT Cart supports 150 lbs. overall, and is balanced to lift 50-95lbs. Include the weight of accessories
and your equipment when choosing the right model for you.
• Comes with contour laminated shelf, gas cylinder with height-adjustment lever, H-shaped metal base with
four 4" casters (two locking).
• Large shelf is 27"w 23.5"d and provides plenty of room for keyboard, mouse, and paperwork. Curved edges
on all four sides are comfortable against your arms when keyboarding.
• Compact footprint (27"w 28"d) fits into tight spaces like OR, ER, and patient rooms.
• Available in Grey Metallic (GM) with Dark Grey (DG), Maple (MP), or Wenge (WE) laminate.
PRODUCT Weight Part # Price
CT Cart - Heavy Load 70 lbs. CTAH27GM/xx4 $1,349
CT CART ACCESSoRiES
CABLE mAnAgEmEnT SySTEm
• Protect power cords and data cables as you adjust the cart up and down.
• Articulating cable chain runs between the work surface and the roomy cable enclosure below.
• Ventilated all-metal enclosure (5.5"w 4.5"d 17.5"h) installs on the base behind the column. It provides plenty of room to store cords and
cables out of sight to protect them from snagging. Ventilation holes also allow installation of a power strip or surge protector,
(sold separately).
• External cable wrap on the back of the enclosure provides additional cable management.
• Available in Grey Metallic with Silver Metallic accent.
PRODUCT Weight Part # Price
Cable Management System 17 lbs. CCMGS $279.95
fLAT pAnEL
moniToR ARm
LARgE diAgnoSTiC
moniToR mounT
28"
32.5"
48.5"
27"
AnThRo in ACTion
Carl’s Table CT03 in use at
Capital Health in Edmonton, Alberta
Prices subject to change.
*Not available for discount.