Anthro PrinterCart Spec Guide - Manual (Page 2)

AnthroCart
ANTHROCART
12
PRiNTeRCART
• Comes with 2 shelves, 4 legs, 1 base tube, and 4 casters (2.375" size, front 2 locking).
• Upgrade to 4" casters by adding a "4" to the end of your Cart’s part number (Ex. 030BK4). Upgrade to Glides
by adding "GL" to the end of your Cart’s part number (Ex. 030BKGL).
• Add the 16"w Handle (see AnthroCart: Accessories) to make the Cart easier to maneuver. Try the Equipment
Strap (see AnthroCart: Accessories) to hold your equipment securely in place.
prOdUCT Height Width (A) Width (B) Width (C) depth (d) depth (E) Weight part # price
24"w x 28"h 28" 25.25" 24" 21" 21.5" 13" 54 lbs. 030xx $339
UlTRACOMPACT CART
• Tucks away in the tightest spaces, even fits in closets! Can be stacked up to maximize your space with
Extension Tubes and an Additional Shelf above (see AnthroCart: Accessories).
• Comes with 2 shelves (the top shelf is 3" deeper than the lower one), 4 legs, 1 retractable Keyboard and
Mouse Caddy, 1 base tube, and 4 casters (2.375" size, front 2 locking).
• The retractable Keyboard and Mouse Caddy measures 19.5"w x 8"d. When put away underneath the top shelf,
the Caddy gives the Cart an overall depth of 19.75" — when fully extended, it gives an overall depth of 26.75".
• Upgrade to 4" casters by adding a "4" to the end of your Cart’s part number. Upgrade to Glides by adding
"GL" to the end of your Cart’s part number. (Ex. 075BN4)
prOdUCT Height Width (A) Width (B) depth (C) depth (d) Weight (2 boxes) part # price
UltraCompact 31" 23.75" 21.25" 18.75" 15.75" 42 lbs., 10 lbs. 075xx $569
ANTHROCART ACCessORies
CPU sOlUTiONs
CPU Roll-out
• These stand-alone shelves roll on 2" casters for easy access to your servers and CpUs.
• Holds up to 240 lbs.
• Available in Black (BK) and Light Grey (LG).
prOdUCT Height Width depth Weight part # price
20" wide 3.75" 20" 23" 17 lbs. CrS20xx $139.95
Not recommended for sit-down applications. does not work with the MiniCart or UltraCompact Cart.
CPU slide-out
• Attach your CpU under your work surface and pull it out when needed. rotate the CpU for easy access to the back.
• The adjustable cradle pulls in and out on a 16" track and holds CpUs 3"–9.5" wide, 12–22" high.
• Weight capacity of 70 lbs.
• Available in Black (BK).
• Comes with 15-year warranty against manufacturing defects.
• drill required for installation.
prOdUCT Weight part # price
CpU Slide-out 17 lbs. 347BK $119.95*
does not work with 24" wide AnthroCart, MiniCart, or UltraCompact Cart.
CPU sideRacks
• Save room on the surface of your Cart by mounting your CpU on the inside or outside of your Cart’s legs.
• Measure the width of your CpU, and add 3" to determine how far the Siderack will extend from the side of your Cart.
• Available in Black (BK) or putty Grey (pG).
CPU SideRack 02
• recommended for Carts 36" wide and larger. Adjusts to fit CpUs 4.5"–10" wide. Weight capacity of 50 lbs.
• Mounts at any height and lifts your CpU approximately 7.5" above the floor when attached in its lowest position.
CPU SideRack with Caster
• recommended for Carts 24" and 30" wide. Adjusts to fit CpUs 4.5"–10"wide and attaches to the base tube. Weight capacity of 100 lbs.
• Comes with a 2.375" caster. If your Cart has larger Casters or Glides, order the same sized Caster for your Siderack as well.
E D
20"
28"
B
C
A
Side View
19.75"
Top Shelf Bottom Shelf
Keyboard Caddy
C
25.25”
25.25”
19.5"
31"
B
A
D
8"
Side View
19.75"
Top Shelf Bottom Shelf
Keyboard Caddy
C
25.25”
25.25”
19.5"
31"
B
A
D
8"
075BN shown above.
CPU sideRACk 02
CPU sideRACk w/ CAsTeR
"We have always been pleased with AnthroCarts and
are proud to offer them with our autonomic labs."
—Peggy S., V.P. Neurophysiology, WR Medical Electronics Co.
Prices subject to change.
*Not available for discount. Prices subject to change.
*Not available for discount. Prices subject to change.
*Not available for discount.