ADTRAN NetVanta Serial Dial Backup Interface Module (DIM) none User Manual

Dbu c

NetVanta Serial Dial Backup Interface Module (DIM)

P/N 1200886L1

For more detailed documentation, visit us online at

www.adtran.com

Quick Start Guide

Quick Start Guide, 61200886L1-13B, July 2006

Technical Support 1-888-4ADTRAN (1-888-423-8726)

PECIFICATIONS

Features

5-pin RS-232 interface via host RJ-45 DBU connector
Modem flow control support via CTS
Communication with external modem via AT commands

Compliance

FCC Part 15 Class A, EN 55022 Class A, EN 55024
EN 61000-3-2, EN 61000-3-3
IEC 60950, EN 60950, UL/CUL 60950, AS/NZS 60950

Physical

Dimensions: 2.3-inch W x 2.75-inch D
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Relative Humidity: Up to 95 percent, noncondensing

An RJ-45 to DB-9 adapter cable (P/N 1200887L1) is
required to connect to the external modem.

NetVanta modules should be installed only in
NetVanta Series products.

CONSOLE

LAN

SLOT 1 NET/D BU

WAN-DDS

DBU

WAN-T1

DSX-1

DBU

ERIAL

DBU C

ONNECTION

INOUTS

NSTALLATION

NSTRUCTIONS

Remove power from the base unit.

If the Network Interface Module (NIM) is already in the NetVanta
chassis, release the pins at both edges of the NIM faceplate and slide
the module out of the chassis.

Carefully align the P1 connector on the NIM with the J1 connector on
the Serial DIM. Using only fingertip pressure so that neither circuit
board bends or flexes, ensure that the connectors are firmly seated.
Secure the Serial DIM to the NIM using the screws and standoff posts
supplied.

Slide the NIM with the Serial DIM attached into the NetVanta option
slot until the NIM is firmly seated against the chassis.

Secure the pins at both edges of the NIM.

Connect the cables to the associated device(s)

Complete installation of the base unit.

For NetVanta modules with outside plant
connections, ensure that all cables are
removed from the module before installing or
removing it from the NetVanta chassis.

Pin

Name

1, 2

Unused

CTS

TXD

RXD

GND

DCD

Unused

Important: For additional details on product

features, specifications, installation, and safety, refer

to the appropriate Hardware Installation Guide on

the ADTRAN OS System Documentation CD

shipped with the base unit and available online at

www.adtran.com.