Vism cqb scope series, Cqb scope series features, Mounting your cqb scope – NcSTAR VCQBEP3540G User Manual

Page 2: Caution

VISM CQB Scope Series

Congratulations on the purchase of your new VISM CQB Scope! The CQB Series of Scopes give you

many great options so you can choose the scope that best fits your needs. Backed by a Lifetime Limited
Warranty, your VISM Scope will provide you with years of reliable service. This Owner’s Manual will help
you understand all of the features of your new scope. Follow all instructions carefully before initial use to
experience the best performance.

CQB Scope Series Features

1. Ocular Lens
2. Quick Focus Ring
3. Elevation Adjustment Dial
4. Objective Lens
5. Rheostat and Battery Compartment
6. Windage Adjustment Dial

7. Quick Release Lever
8. Auto-Locking Latch
9. Integrated Weaver/ Picatinny type Mount
10. Mount Recoil Lug
11. Lock Nut
12. Allen Head Adjustment Screw

CAUTION:

BE SURE THAT YOUR FIREARM IS UNLOADED AND POINTED IN A SAFE DIRECTION.

PRACTICE SAFE FIREARMS HANDLING PROCEDURES AT ALL TIMES.

NOTE: IF YOU ARE UNFAMILIAR WITH THE PROCESS OF MOUNTING A SCOPE, IT MAY BE
NECESSARY TO EMPLOY THE SERVICE OF A QUALIFIED GUNSMITH.

Mounting Your CQB Scope

The CQB Scope is equipped with a Quick Release Mount with an Auto-Locking Latch. To attach

the CQB Scope to a Weaver/ Picatinny/ MIL-STD 1913 type rail, move the Auto-Locking Latch located
within the Quick Release Lever away from the pivot point and swing the Quick Release Lever to the
forward (Open) position. Place the Quick Release Mount onto the optics rail, with the Recoil Lug placed
into one of the cross slots on the optics rail. Move the Quick Release Lever rearward (Closed position) to
secure/tighten the Quick Release Mount to the optics rail.

On the Left side of the Quick Release Mount is a Lock Nut and Allen Head Adjustment Screw. The

Allen Head Adjustment Screw is used to adjust the rail mount tension. To adjust the rail mount tension,
you must first loosen the Lock Nut Counter-Clockwise (). Once the Lock Nut is loosened or removed, you
can then use an Allen wrench to turn the Allen Head Adjustment Screw.

This manual is related to the following products:

VCQBEM3540G