NcSTAR AQPTFLG - Manual

GREEN LASER OR LED FLASHLIGHT WITH
QD WEAVER STYLE MOUNT
 The Tactical Green Laser/ LED Flashlight will quickly and securely mount onto most
Weaver/ Picatinny type rails, but not all (depending on the location of the cross-slots
on the rail itself).
 The use of the laser will not replace the use of other sighting devices in regards to
accuracy, but it will certainly aid in locating your target quickly.
 Always be sure that the unit is OFF when not in use, to preserve battery life.
 DANGER: AVOID DIRECT EYE EXPOSURE TO LASER BEAM. LASER RADIATION IS
EMITTED FROM THE APPERTURE.
 If you are not sure about any of the procedures in this manual, always seek the help of
a qualified professional to avoid damage to your Green Laser/ LED Flashlight and your
firearm.
INTRODUCTION:
Congratulations on your purchase of the AQPTFLG! This unit comes included with two assemblies: a Green Laser
Assembly (that is adjustable for windage and elevation) and a LED Flashlight Assembly.
You have the option to install either assembly onto the Main Body that houses the: Battery, ON/OFF Switch, and
the Quick Release Mount (that will fit onto most Weaver style/ Picatinny type rails).
FIGURE 1