NcSTAR SRTR3942G - Manual (Page 9)

BUILT IN LASER
Your Rubber Armored Mark III Tactical Scope is equipped with a fully adjustable
Built In Red Laser. Use the provided allen wrench to adjust your Laser for Windage
and Elevation. Turning the Rheostat Knob to setting “B” in accordance with the rear
indicator marking will turn Both the laser and reticle illumination to the on position.
Turning the Rheostat Knob to setting “L” will turn only the laser to the on position.
Twisting the Laser Elevation Adjuster counter-clockwise move the Laser up, and
twisting the Laser Elevation Adjuster clockwise will move the Laser down (Fig. 8).
Twisting the Laser Windage Adjuster counter-clockwise will move the Laser to the
left, and twisting the Laser Windage Adjuster clockwise will move the Laser to
the right (Fig. 8)