Renkus-Heinz RHAON 32-Bit - Manual (Page 14)

Users Manual
Continue until all networked loudspeakers are
linked to icons in the main workspace. When an
icon is linked to a networked loudspeaker, the
status indicator under its name changes from
Unassigned (Red) to OK (Green). Notice that
the directory listing for that loudspeaker also
moves from the Network folder to the Speaker
folder.
To confirm that the setup is complete, return to
System Layout and place the cursor over the
loudspeaker listings in the directory tree. As
you can see from the pop
up screens, RHAON has as-
signed IP numbers to each
of the loudspeakers.
Note that you could also
open the Network Manager and view this same
information in list form. To open the Network
Manager, go to the File pull down menu and select Network Manager.
Let’s take a closer look at the Connect Mode loudspeaker icon.
Clockwise from the top, the first item is the icon’s name. The loudspeaker symbol on the right of the Status Bar is a Mute control: click on it
to mute or un-mute the loudspeaker. The green triangles on the far right represent CobraNet Transmitters (Tx). Each CobraNet Transmitter
can transmit one channel of information from the DSP out to the CobraNet network. The green Status bar reading OK at the bottom of the
icon indicates this icon has been linked to a networked loudspeaker and is operating satisfactorily. A red bar would indicate a problem and
the text would identify the problem, such as unassigned.
To its left of the status bar is a “W” button. Click on it to Wink the light on the front of the networked loudspeaker that is linked to the icon.
This makes it easy to identify the loudspeaker and confirm its location. On the outside left edge of the icon are two red triangles represent-
ing CobraNet Receivers (Rx): each can receive one signal out of a bundle of up to 8 audio channels from the network.
Double clicking on any loudspeaker’s Connect icon opens the Connect Properties screen associated with the linked loudspeaker. More
details on Properties screens are on the next page.
CobraNet Receivers
Turns “Wink” Light ON & OFF Status Indicator
Name CobraNet Transmitters
Turns Mute ON & OFF
14
CONNECT