Stuart Turner Submersible Diver 35 & 45 Boostamatic - Manual (Page 11)

- 3 -
General
The Diver pump range is designed for re-circulation, drainage and transfer of clean fresh
water in outdoor or indoor applications.
All models within the range incorporate an adjustable float switch assembly which
provides automatic pump control.
These models are suitable for clean water only.
PRODUCT DESCRIPTION
Electric motor driven submersible pump with float switch control.
Motor
All motors are induction type, permanent capacitor, fitted with integral auto-resetting
thermal overload protection, IPX8 enclosure, class ‘B’ insulation and continuously rated.
The motor is encapsulated in a casing and protected from water ingress by a mechanical
seal running on a shaft sleeve, lubricated with a biodegradable vegetable oil.
Pump
All models are close coupled to the motor and are of centrifugal design and are supplied
as standard with a hose connector and are supplied pre-fitted with a 15 metre mains
supply cord.
Standard pump materials of construction of major wetted parts are as follows.
Model Body Impeller Shaft
Motor
Encapsulent Outer
Sleeve Mechanical
Seal
All models
Glass filled
Polypropylene
Polyamide Stainless Steel
Stainless Steel/
Cast Aluminium Stainless
Steel
Nitrile/
Carbon/
Ceramic
Cont ...
Float Switch
Factory fitted assembly for automatic pump control, provided as standard on the Diver
range. The wetted materials of construction are polypropylene.
LIMITS OF APPLICATION
Model
Max.
Liquid
Temp.
o C
Min.
Liquid
Temp.
o C
Max.
Immersion
Depth
(m)
Min.
Immersion
Depth
(mm)
Max.
No.
Starts/h
Max.
Head (pump
closed valve)
(m)
Diver 35 35 4 10 300 30 34
Diver 45 35 4 10 300 30 42