MAHLE RTI Laser 4 - Manual (Page 8)

Page 8
BATTERIES
Readout One 9 volt Battery
Data Accumulator Attach AC Adapter to AC Adapter Receptacle to charge the main battery. An
audible beep every three seconds indicates that the battery needs recharging.
The unit will automatically shut off if battery power becomes excessively
low. Also, the unit automatically shuts off after five minutes of non-use to
conserve battery power.
A long-life lithium battery powers the application program. A message
“BATTERY LOW” or “LITHIUM LOW” on the LCD Display indicates this
battery is running low. Contact Technical Support if this message appears
ENTERING PERSONAL INFORMATION
This information only needs to be entered once during the first use of the system.
The Data Accumulator will permanently store up to five lines (16 characters each) of personal
information such as the business name, address, phone number, etc. This information will
automatically print at the top of each printout from the printer. Follow these steps to enter this
information:
1 Press the ON/OFF key to turn the unit on.
2 Press the 1 key. Ignore the next message displayed.
3 Momentarily press and release the following keys in order 9 - 8 - 2 . The display will indicate
“ENTER LINE 1 OF PERSONAL INFO”. A blinking cursor indicates the position of the first
character entry.
4 Use the Arrow Keys (See Figure on Page 7, Item 9) to move the cursor and enter characters
in each position. The Up and Down arrow keys change the alpha-numeric characters at the
cursor position. The numbers and alphabet can be scrolled by holding the Up or Down arrow
keys. After each character is selected, press the Right arrow key to move the cursor to the next
position. Pressing the Left arrow key will move the cursor to the preceding position.
5 Press the Enter Key after each line of information is complete. The LCD Display will indicate
which of the five lines of data is being entered.