MAHLE RTI BRC550 - Manual (Page 5)

Page 3
III. Checking out the parts
A. The BRC500/550 lathe comes standard with:
Main lathe housing assembly
Foundation mounting bolts (Qty=4)
30 mm diameter Arbor with four Allen head cap screws
Standard Adaptors (See Figure 1)
Large open end wrench for Arbor nut
T-Handle wrench for square locking screws on cutting tip holders and bars
Small Allen Wrench for locking belt pulley
Hand-held mini-lubrication pump for slideway nipples
15 mm (1/2") Positive Rake disc cutting tip holders (Qty=2, one right & one left)
Positive Rake Cutting Tips (Qty=10)
Drum cutter bar with Tip Holder
Vibration dampening rubber ring for discs
Vibration dampening belt for drums
Cleaning brush
B. The optional bench comes with:
Top Panel
End Panels (Qty=2)
Mid Panels (Qty=2)
Nuts and bolts for assembly
Assortment of studs for storage of accessories
C. The optional merchandising and light kit comes with:
Uprights (Qty=2)
Peg type back board
Sign
Flourescent light
Chains for hanging light (Qty=2)
Nuts and bolts for assembly
D. The optional HD truck adaptor kit includes (See Figure 2):
Hub Surface Locator for rotors with inside hat diameter greater than 6.95" (176 mm)
Outboard Supporting Cone to match the large Hub Surface Locator
The 3-5/8" to 4-7/8" (92-123mm) Inboard Centering Cone should be ordered separately.
Call RTI or your distributor for other accessories that are available.