MAHLE RTI BFX-1 - Manual (Page 4)

IMPORTANT: Test drive vehicle after service to verify proper
brake system performance.
Page 3
Safety Precautions
WARNING: Failure to follow these precautions can result in
serious injury or death.
• Read and understand the Operation Manual completely before operating this unit.
• Always wear proper eye and skin protection when operating and maintaining this
equipment.
• Only disassemble or reassemble unit parts when directed by an RTI representative.
• Clean any spills that may occur immediately. Brake fluid is corrosive and is a high slip
hazard.
• Avoid exposure with painted surfaces. Brake fluid is corrosive and will damage the
finish on most painted surfaces. Use of fender covers is recommended.
• Always use vehicle specified brake fluid. Failure to do so may cause brake system
damage. The BFX is designed to use DOT 3 or 4 brake fluid. Use of any other fluid type is
not recommended and may void warranty.
• Comply with local, state and federal regulations for fluid disposal.
• Material Safety Data Sheets (MSDS) must be obtained on all chemicals and placed in a
shop file for reference. Note: MSDS can be found on the RTI web site www.rtitech.com.
• It is important to test drive every vehicle after the service to verify proper brake system
operation. Failure to do so could result in undetected brake system failure.
CAUTION : Failure to follow the precautions as outlined in the Operation Manual can
result in damage to the engine, vehicle or equipment which will not be
supported or covered under warranty.