Thermolec Application &Technical Notes - Manual (Page 70)

FEATURES
• Back to back thyristors output
• Zero crossfired units
• Generous heatsink for lower operating
temperature
• Integrated triggering circuitry.
• CSA recognized
• Designed to comply with V.D.E.
requirements
Typical Applications
• On/Off and proportional control of electric
heating equipment
• Interfacing of microprocessor controls to AC
loads such as baseboard heaters, duct
heaters, etc.
• Replacement of electro-mechanical line
contactor
• Industrial and process control
TransAX™: A superior protection !
Usually there are two methods used to absorb
transients: RC networks and Metal Oxyde
Varistors (MOV). Both methods are unsufficient
in certain cases.
The new TransAX™ option eliminates the
problems normally associated with RC networks
and MOV’s.
It is an active component that can quickly switch
very high currents. Instead of absorbing
excessive energy endlessly, at a predetermined
programmable trip point it passes the energy
back to the line. During normal operations the
switch sits idle and is always ready to activate.
How to order :
Example : SSR-30-6-DC-B
Solid State Relay, 30 Amps, 600V Max, DC, Box
S olid
S tate
R elay
SSR 20 1 AC B
20= 20 Amp
30= 30 Amp DC= 3-30 VDC
AC= 24 VAC
B= Box type
O= Open type
1= 347V Max
6= 600V Max