Sterling RT - Manual (Page 8)

8
Figure 7 - Unit/Curb End Rail Assembly
Figure 6
D3809-3
Unit/Base Rail
Assembly
Curb Cap End Adaptor -
Supplied with the Unit
(one each end).
* For Field Installations: These Crossbrace/Curb
Adapters (2 adapters ship with each rooftop
arrangement) must be repositioned in the fi eld
when the unit is mounted on a curb or a platform
(one for each end). Simply remove the screws,
turn the piece over (end for end) and secure in
place using the holes/hardware provided. All
joints and seams must be sealed completely
in the fi eld to prevent leaks.
* Refer to Figure 4D for A dimension.