Yokogawa DAQWORX - Manual (Page 19)

2-10 IM WX1-06E
2.6 Changng the Port Number and Savng the
Settngs
Procedure
Changng the Port Number
Carry out the procedure below if you wish to change the TCP/IP port number that is used
by DAQLOGGER or remote monitors to connect to GateMX/MW.
1. From the Fle menu, choose Port No..
The Port No. dialog box opens.
2. Enter the port number used for the monitor server.
The default value is 50297.
3. Click OK and restart GateMX/MW.
You must restart GateMX/MW to activate the new port number.
Savng the Settngs
From the Fle menu, choose Save or Save As.
If you choose Save As, enter the file name in the dialog box that appears and save the
file.
Note
If you choose Save when you have not saved to a specific file name before, the same dialog
box that opens as when you choose Save As opens.
Changng to the Saved Settngs
From the Fle menu, choose Open. Select and open the desired file in the dialog box
that appears.