Yokogawa Standalone MW100 - Manual (Page 9)

9
IM CA150E
Once an instance has been properly confi gured, the MW100 inputs and outputs will show up in the Controller Tags window.
MW100 Channels within RSLogix 5000 ® Controller Tags Screen
These points can now be assigned as inputs and outputs as well as monitored (when online) within programs as shown in the
example below. Note that the tags can be used within any logic element (not just MSG blocks as with Explicit Messaging). In this
case the logic is reading from the fi rst input instance corresponding to Communication Channel C001 and writing to the output
instance corresponding to Communication Channel C101.
Sample Logic using I/O Messaging
Step by step examples of implicit messaging within RSLogix 5000 ® are detailed in Appendix A.