Yokogawa Standalone MW100 - Manual (Page 11)

11
IM CA150E
Summary
The MW100 with EIP support can easily communicate via Explicit or I/O messaging to a variety of PLCs. The MW100 requires
the PLC to initiate all communications. Now that the MW100 can communicate with EIP based PLCs, the full capabilities of the
DAQMaster MW100 can easily be added to a controller network.
A PLC can use the MW100 as remote inputs and outputs within its control logic.
A PLC can write its inputs and register values into the MW100 Communication Channels (C001 through C300) so the MW100
can record up to 300 PLC data points (Communication Channels must be placed into Computation Channels; only Computation
Channels (A001-A300) and I/O Channels (001-060) can be recorded on an MW100).
Full MW100 network services are available including: real-time web-pages for monitoring data values, FTP of data fi les, e-mail,
as well as custom web-pages (layout the data with graphics and save on purchasing a standalone HMI).