Yokogawa SPS24 - Manual (Page 28)

<6. Setup>
6-2
IM 12A01S02-01E 1st Edition : May 10, 2013-00
The file name can be up to 255 single-byte characters (127 double-byte characters).
A file name cannot contain any of the following characters: + * / ? ” < > |
l [Initialize]
Initializes the settings.
Does not include: RS Port Number, Select Language, and User Account settings
Includes: [Select column] setting of the database viewer
6.1 RS Port Number
Configures the RS port number of each USB-RS485 conversion cable.
The RS port number cannot be changed for any connected sensors. Disconnect sensors before
changing this setting. See “2.5 How to use the SPS24”.
This function is used when connecting new sensors or changing the configured sensor number.
6.2 Communication Log
CAUTION
Never use the communication log. This screen is used for troubleshooting by our service
engineer only.
6.3 Unit Setting
Select between degC(°C) and degF(°F) for the temperature unit.
If your PC location is set in Japan, the setting is fixed to degC.
6.4 Display
Configures the date format and decides whether to show or hide the menu bar.
6.5 Select Language
Selects the system language (English or Japanese).
6.6 User Account
This function is used for enabling or disabling the user account (password management) and for
configuring the user level and password of each user.
After registering users, set a password for each user and then control the available functions (see
Table 6.2).
By enabling a user account, the name of the current logged-in user is displayed after “welcome”
in the toolbar. See “7. Account” for more information.
Operator names are also recorded in the calibration history.